0

Valve Body Repair DSI M78

Worldwide Shipping 🌎

  • Brand: MAKTRANS
  • Product Code: remontgDSIM78
    Product model copied to clipboard
  • Weight (kg): 10
  • Availability: 1988
$300.00
If you order more than 994 pcs - shipping time will be longer at few days
Stock Place: Availability: Price: Qty:
Poland 994 pcs. $300.00
Add to cart
Add to cart
Ukraine 994 pcs. $300.00
Add to cart
Add to cart
  • Product overview
  • Shipping & Payment
  • Questions - Answers (1)

Valve body repair DSI-6 M78. Solenoid regeneration.

The DSI-6 M78 is designed for full or rear-wheel drive vehicles. In the SsangYong range, this automatic is installed on Action, Korando and Kyron.
The DSI-6 M11 is designed for full or front-wheel drive vehicles. In the SsangYong range, this automatic transmission is installed on the New Action (Korando C).

All known facts.
The main quality characteristic of the automatic transmission is the smooth running, i.e. no impacts,thumps, slips and long shifts between gears. If at least one of the above types of malfunction occurs, it is necessary to contact the service to solve the problem as soon as possible. Further operation of the automatic transmission with a defect can lead to the failure of a larger number of mechanisms and parts of the automatic transmission.

Diagnostics.
To determine the type of fault  the diagnostic tool is used. Then, the valve body is removed and a visual assessment of its condition is made. An obligatory stage in the diagnostics of a hydraulic unit is testing its electromechanical control valves (solenoids).

This is how a valve body looks like

This is a solenoid.

After dismantling, the solenoids are alternately tested on special stands.

Stand number 1

Stand number 2

For each solenoid, a plunger state plot is plotted over the entire range of the control signal values.

Plots of a working solenoid

The graph of the failed solenoid. Unstable work, the presence of flat parts of the stuck plunger "steps."

Unstable operation of the valve body solenoids causes faults such as thumps, slips and delayed gearshifts. The lack of smoothness in the solenoid's operation is explained by the graphs of the faulty solenoid: the steps of the graph  are manifestations of the malfunction. The type of failure of the valve body (thumps slips and delayed gearshifts ) depends on the number of the solenoid and its location in the valve body.

Solution.
The failed solenoids are to be replaced or restored. The method of solenoid recovery was developed by the specialists of  Maktrans companyon the basis of many years of experience in valve body servicing .

The essence of the methodology
The electromechanical valve consists of a cover with a bushing, a return spring, an insulating ring, a core and a housing. The housing includes a solenoid coil, a control terminal and a guide sleeve.

During operation, the solenoid bushings are worn out by the action of fine particles (metal shavings, oil oxidation products, etc.) which get into the oil inside the valve body housing. As a result of the wear out, the central bore of the bushing acquires an eccentricity (displacement of the hole center relatively to the normal one).When the center of the hole of the guide bushing is displaced from at least one side of the solenoid, the axis of the core movement can be skewed and, consequently, the core jam occurs during its movement inside the coil of the solenoid. Such jams are marked on the chart of the unstable solenoid by flat section.

Guide couplings with  " 12 hours" wear

To restore the work of the solenoid, the failed couplings are replaced for new ones. The new couplings are made by the specialists of the  Maktrans company.

Disassembly of the solenoid, replacement of the bushings for the new ones and assembly (closing) of the solenoid are carried out by a special tool developed by the specialists of Maktrans company. After assembly, the solenoid with a new set of bushings is tested for compliance with operating parameters. After testing regenerated solenoid is installed in the valve body Further, the operation of the automatic transmission is tested on the go.

Result.
Solenoids restored by the technique of the specialists of the  Maktrans company, respond to the operatonal parameters of solenoids  for ify;">DSI-6 M78 и DSI-6 M11 automatic transmissions . The service life of this solenoid after recovery corresponds to the life of the new one at a relatively lower price

Shipping & Payment

Payment

  • PayPal (Payment to a PayPal account, without obtaining European VAT documents)
  • Bank Transfer P2P only (Payment for private banking account, without the possibility of obtaining European VAT documents)
  • Crypto Payment (If you want to make payment in cryptocurrency, without the possibility of obtaining European VAT documents)
  • B2B sale with VAT ID: no VAT is charged (When buying for more than 300 euros, B2B sale with VAT IDfor countries VIES: no VAT is charged (With mandatory indication of the European VAT number and receipt of documents for the company) when buying for more than 300 euros


Shipping

We work with shipping companies like DPD, DHL, FedEx and we can ship worldwide. Shipping cost you can see during checkout and on product page (you can use button "Shipping Cost Calculator")

Questions - Answers (1)
Francis Mwila

Where is your company located? Is this valve body new or second hand? My car was jerking when shifting from one to two. Now I don't have gear one. Could this be valve body problem or Solenoids? Code P0700

MAKTRANS MAKTRANS

Hello, it's not a spare part, it's a service. We can repair your valve body.