$0.00
Checkout- Product Code: 0am-sol-swap
Product model copied to clipboard
- Availability: 2000
Stock Place: | Availability: | Qty: |
Ukraine | 2000 pcs. |
|
- Product overview
- Shipping & Payment
- Questions - Answers (2)
Skoda Octavia A5 1.8 TSI DSG 7 0AM (DQ200). Replacing the clutch actuator solenoid.
Describing the problem.
When driving in Drive mode, thumps are felt when shifing to even gears. I.e. when shifting from the first gear to the second - the thump and when shifting from the third to the fourth -jerk. In some cases, after the next jerk, the box entered the emergency mode (flashing key on the dashboard).
Diagnostics.
To select the strategy for troubleshooting the automatic transmission, first of all, a diagnostic tool is used. Reading errors in our case showed the code P176F (Clutch 2 is inadvertently closed sporadically). Most often this code indicates the unstable operation of the clutch actuator solenoids that are part of the gearbox electrohydraulic control unit. In the picture below, the pointers to the problem solenoids are marked in red.
Troubleshooting..
Removal of the gearbox electromechanical control unit (mechatronic).
Disassembly and washing of mechatronics. Visual assessment of the condition of the body of the valvebody for the presence of characteristic defects.
Removal of solenoids for testing on a special test bench.
Stand for testing the operation of solenoids
Installing a solenoid for testing
All solenoids are tested sequentially. The schedule of a working solenoid is:
And this is a work schedule of a failed (not stable) solenoid
During the tests, a failed solenoid with unstable operation was detected. This solenoid controls the clutch K2 (second primary shaft) on which the second and fourth gears are located. I.e. unstable operation of the solenoid caused the jerks in the operation of the gearbox. This solenoid must be replaced.
After replacing the solenoid, mechatronics is assembled and a preliminary check of its hydraulic system is performed. The operation of the engine of the oil pressure pump is checked, diagnostic conditions are read. After the diagnostic tests, the mechatronics is installed and connected to the gearbox.
Result.
After replacing the solenoid, the box's operation stabilized. Jerks when switching the second and fourth gear are not observed.
Payment
- PayPal (Payment to a PayPal account, without obtaining European VAT documents)
- Bank Transfer P2P only (Payment for private banking account, without the possibility of obtaining European VAT documents)
- Crypto Payment (If you want to make payment in cryptocurrency, without the possibility of obtaining European VAT documents)
- B2B sale with VAT ID: no VAT is charged (When buying for more than 300 euros, B2B sale with VAT IDfor countries VIES: no VAT is charged (With mandatory indication of the European VAT number and receipt of documents for the company) when buying for more than 300 euros
Shipping
We work with shipping companies like DPD, DHL, FedEx and we can ship worldwide. Shipping cost you can see during checkout and on product page (you can use button "Shipping Cost Calculator")
VAG DQ200 P175e R175d Підкажіть будь ласка що робит?
Відділ ремонту
+38 050 5272236
+38 067 5272236
+38 073 5272236
Hello, I have a stronic 7speed with a code fault P175D clutch one It's problem of clutch or mecatronic? If it's mecatronic, i can send you since France to repair? Thank you
Hello, usually it's mechatronic. You can send it to us:
Our details for sending automatic transmission parts for repair (if you are company):
- +48 223 906 210
- MAKTRANS Sp. z o.o.
- ul. Mazura 18A
- 02-830 Warszawa
- Poland
If you are private person choose the adress bellow:
- +48 799 920 753
- Dmytro Rabizo
- ul. Mazura 18A
- 02-830 Warszawa
- Poland