Rear planetary gear kit (3 satellites, front sun gear non removable, K2 hub for 55 teeth) AW TF-60SN 09G with ring gear (72 teeth) and K3 hub (37 splines)

Rear planetary gear kit (3 satellites,  front sun gear non removable, K2 hub for 55 teeth) AW TF-60SN 09G with ring gear (72 teeth) and K3 hub (37 splines)

• The total height of the planetary gear housing is 69 mm.

Planetary gear housing :

Hub Low / Reverse:

•  
•     Hub height - 24 mm.
•     Hub for friction plate - 56 teeth.
•     The outer diameter of the hub is 145 mm.

Hub K2:
 

•     The height of the hub (gear part) is 18 mm.
•      Hub for friction plate- 55 teeth.
•     The outer diameter of the hub is 125 mm.

Front sun gear (non removable):

•     The number of splines (K3 Braban hub) is 37 pcs.
•     The number of teeth on the gear is 33 pcs.

Satellites of the front sun gear:

•     The number of satellites is 3 pcs.
•     The number of teeth on the satellite is 18 pcs.

Rear sun gear:

•     Total height - 91 mm.

Gear shaft:

•     The number of splines (drum K1) - 28 pcs.
•     The outer diameter of the spline part is 29.75 mm.
•     The inner diameter of the sleeve is 20.85 mm.

Gear:

•     The number of teeths is 27 pcs.
•     The outer diameter of the gear is 46. 45 pcs.

Satellites of the rear sun gear:

•     The number of satellites is 3 pcs.
•     The number of teeth on the satellite is 18 pcs.

Ring gear:
 

•     Total height - 39 mm.
•     The number of teeth is 72 pcs.
•     The outer diameter of the gear is 124.70 mm.
•     Gear height - 29 mm

Drum hub K3:
 

•     Overall height - 41 mm.
•     Number ofsplines - 37 pcs.
•     The number of teeth of the drum K3 (outer crown of the hub) - 40 pcs.
•     The outer diameter of the hub (along the outer ring gear) is 162 mm.