Differential primary gearset AW TF-62SN 09M 4WD (gear ratio 59 Diff gear / 16 Pinion, 4 notches on the gears), Driven Transfer Gear 54 teeth, bearings of the intermediate shaft 23/17 roller)

Differential primary gearset AW TF-62SN 09M 4WD (gear ratio 59 Diff gear / 16 Pinion, 4 notches on the gears), Driven Transfer Gear 54 teeth, bearings of the intermediate shaft 23/17 roller)

Before buying a kit, pay special attention and compare the gears of your transmission with the gears presented on the site according to the following main parameters:
 

•     Number of gear teeth
•     Gear outer diameter
•     Gear notches
•     Number of rollers on taper radial bearings of the intermediate shaft

Drive Transfer Gear Output Gear (complete with support):

•    The number of teeth is 47 pcs.
•     The number of notches is 3 pcs.
•     The outer diameter of the gear is 126.50 mm.
•     The width of the gear is 25.55 mm.

Differential ring gear (4 notches):

•  
•     The number of teeths is 59 pcs.
•     The number of notches is 1 pcs. (In the center of the gear)
•     Outside diameter - 205 mm.
•     Gear width - 45.60 mm.
•     The number of mounting holes is 16 pcs.
•     The differential seat depth is 27 mm.

Intermediate shaft:

•  
•     The total shaft height is 160 mm.

Countershaft bearings:
 

•     Tapered radial bearing (large, front) - 23 rollers. / bearing width - 19.15 mm.
•     Tapered radial bearing (small, rear) - 17 rollers.

Gear Driven Transfer Gear 54 teeth (3 notches):
 

•     The number of notches on the gear is 3 pcs.
•     The outer diameter of the gear is 144 mm.
•     The width of the gear is 25.25 mm.

Differential pinion gear 16 teeth (1 notch):
 

•     The number of notches on the gear is 1 pcs.
•     The outer diameter of the gear is 62.50 mm.
•     The width of the gear is 49.65 mm.

• 
  Parking gear:
  
      The number of teeths is 14 pcs.
      The outer diameter of the parking gear is 106 mm.