Oil pump 09K TF-61SN 09M TF-62SN (with radial needle bearing, torque converter)

Oil pump 09K TF-61SN 09M TF-62SN (with radial needle bearing, torque converter)

Oil pump hub:
 

•     The total height of the hub is 95 mm.

Hub housing:
 

•     The outer diameter is 136 mm.
•     The number of oil channels - 5 pcs.

The front part of the hub:
 

•     The height of the front of the hub (shaft) is 37 mm.
•     The number of splines is 38 pcs.
•     The outer diameter of the spline part is 30.85 mm.
•     The inner diameter of the sleeve is 22.20 mm.

Hub rear part:
 

•     The height of the rear of the hub is 45 mm.
•     The distance from the edge of the hub to the start of the first oil feed hole is 24.50 mm.
•     The number of slots is 35 pcs.
•     The outer diameter of the spline part is 37.65 mm.
•     The outer diameter of the working part of the hub is 41.53 mm.
•     The height of the working part of the hub is 16 mm.
•      The outer diameter of the teflon ring socket is 44.55 mm.

Hub teflon ring:

•     The number of hub teflon  rings is 2 pcs.
•     The outer diameter (in closed form) is 44.85 mm.
•     The thickness of the Teflon ring is 2.25 mm.

Oil pump gear:

Pinion gear:

•     The number of gear teeth is 9 pcs.
•     Outer diameter (teeth) - 70.40 mm.
•     The inner diameter (between the teeth of the transformer) is 43.85 mm.
•     The number of teeth of the torque converter is 2 pcs.
•     The thickness of the gear is 11.20 mm.

Driven gear:
 

•     The number of gear teeth is 10 pcs.
•     Outer diameter - 88.45 mm.
•     The thickness of the gear is 11.20 mm.