Valve body filter 0CK (S-TRONIC DL382-7F) 2016-UP 0CK-325-121-D 2-1085-300

The 0CK Mechatronic has 2 pressurized cartridge filters. It's the bigger one.

• D 56 mm
• H 82 mm
• 64x70 mm rubber ring

0CK, 0CL, 0CJ
0DK, Hybrid, Ultra Quattro

Removal and installation requires special tools and equipment.
When working with the hydraulic control part, keep clean, protect the oil passages from debris,
the ingress of small particles can lead to malfunctions of the mechatronics.

1 - valve body (removal and installation)
2 - O-ring (replacement)
3 - low pressure switch (replace)
4 - sealing ring (replacement)
5 - filter cover (replacement)
6 - M6 x 20 bolts (recommended to replace)
7 - O-ring (replacement)
8 - suction filter (replacement)
9 - M5 x 18 bolts (recommended to replace)
10 - M6 x 20 bolts (recommended to replace)
11 - filter cover (always replace)
12 - sealing ring (always replace)
13 - high pressure filter (always replace)
14 - sealing ring (always replace)

Scheme and sequence of tightening the filter cover

High pressure filter cap - PAY ATTENTION TO ARROWS

Shoulder Bolt Torque Specification/Optional Rotate
1. -1 to 3 Nm (set completely by hand)
2. -1 to 3 (8 Nm)
3. -1 to 3 (optional rotate 90°)

Low Pressure Filter Cap - Step B

Bolt Torque Specification/Optional

Turn

1. -1 to 4 (set completely manually)

2. -1 to 4 (8 Nm)

3. -1 to 4 (optional rotate 60°)

Tags: 0CK325121D, 21085300 SF471, JT702, 259710T 515440, 0CK-325-121D, 0CK325121D