Input shaft and drum E Clutch ZF 6HP19X 6HP21X (5 friction plates)

Input shaft and drum E Clutch ZF 6HP19X 6HP21X (5 friction plates)
 

•     Total height - 298 mm.
•     The height of the shaft (from the base of the drum) is 243.50 mm.
•     Drum height (taking into account ring gear) - 89.70 mm.
•     The number of splines on the shaft is 27 pcs.
•     The diameter of the splined part is 22 mm.

Ring gear:
 

•     The number of teeth is 71 pcs.
•     The inner diameter of the ring gear is 112.70 mm.
•     The height of the ring gear (gear part) is 20 mm.

Drum internal side:

•     The depth of the drum (from the top to the seat of the retaining ring) is 0.50 mm.
•     The depth of the drum from the seat of the retaining ring to the piston (installation site of steel and friction plates) is 24 mm.

Steel and friction plate kit E CLUTCH clutch pack:

•     The total thickness of the pack is 24.70 mm.

Support disk (clamping):

    Thickness - 3.50 mm.
    The inner diameter is 97.05 mm.
    The number of teeths is 24 pcs.
    The number of discs in the set is 1 pcs.

Friction plate:

•     Thickness - 1.35 mm.
•     Outside diameter - 123.85 mm.
•     The number of teeth is 30 pcs.
•      Kit plate number 5 pcs.

Steel plate:

•     Thickness - 2 mm.
•     The inner diameter is 97 mm.
•     The number of teeth is 24 pcs.
•      Kit plate number 5 pcs.

Pressure plate / spring plate (steel):

•     Thickness - 0.75 mm.
•     The inner diameter is 101 mm.
•     The number of teeth is 24 pcs.
•      Kit plate number 1 pcs.