$0.00
Checkout
$100.00
Shipping to United States from $52.52
If you order more than 999 pcs - shipping time will be longer at few days
| Stock Place: | Availability: | Qty: |
| Slovakia | 999 pcs. |
  |
| Ukraine | 999 pcs. |
|
- Product overview
- Shipping & Payment
- Questions - Answers (0)
- Gearbox works better with (4)
ECU 722.9 programming is necessary if the electronic unit is replaced with a new or used.
Maktrans specialists are able to perform the following operations with blocks 722.9:
- Firmware reset
- Programming (firmware is selected by VIN code of the car)
- Coding is the adaptation of a block to a car; it is highly desirable to perform it on a car.
Also on sale there are new original conductor plate:
:
The following error codes indicate the need to replace the conductor plate:
- P0601 0601 Incorrect variant coding or configuration was recognized)
- P0604 0604 Faulty structural unit Y3 / 8n4 (control unit integrated in the automatic gearbox (VGS)
- P0605 0605 Faulty structural unit Y3 / 8n4 (control unit integrated in the automatic transmission (VGS)
- P0606 0606 In the case of this DTC, this is an imaginary malfunction)
- P0607 0607 Faulty structural unit Y3 / 8n4 (control unit integrated in the automatic transmission (VGS)
- P060A 060A Faulty structural unit Y3 / 8n4 (control unit integrated in the automatic transmission (VGS)
- P060C 060C Faulty structural unit Y3 / 8n4 (control unit integrated in the automatic transmission (VGS)
- P0613 0613 Faulty structural unit Y3 / 8n4 (control unit integrated in the automatic transmission (VGS)
- P061B 061B Faulty structural unit Y3 / 8n4 (control unit integrated in the automatic transmission (VGS)
- P062F 062F Faulty structural unit Y3 / 8n4 (control unit integrated in the automatic transmission (VGS)
- P0633 0633 Faulty structural unit Y3 / 8n4 (control unit integrated in the automatic transmission (VGS)
- P0641 0641 Faulty structural unit Y3 / 8n4 (control unit integrated in the automatic transmission (VGS)
- P0642 0642 Faulty power supply of the speed sensors) (Undervoltage)
- P0643 0643 Faulty power supply of speed sensors) (Overvoltage)
- P0651 0651 Defective Y3 / 8n4 subassembly (control unit integrated in the automatic transmission (VGS)
- P06A3 06A3 Faulty structural unit Y3 / 8n4 (control unit integrated in the automatic transmission (VGS)
- P0701 0701 Faulty structural component Y3 / 8n4 (control unit integrated in the automatic transmission (VGS)
- P0705 0705 Faulty structural unit Y3 / 8s1 (gear range sensor (VGS)
- P0706 0706 Check component Y3 / 8s1 (gear range sensor (VGS)
- P0711 0711 Faulty structural unit Y3 / 8n4 (control unit integrated in the automatic transmission (VGS)
- P0712 0712 Signal of structural unit Y3 / 8s2 (gearbox oil temperature sensor (VGS) is unreliable) (Undervoltage)
- P0713 0713 Signal of structural unit Y3 / 8s2 (gearbox oil temperature sensor (VGS) is unreliable) (Overvoltage)
- P0714 0714 Faulty structural unit Transmission oil temperature sensor)
- P0716 0716 An increased number of revolutions of the input shaft of the gearbox)
- P0717 0717 Signal from structural unit Y3 / 8n1 (turbine speed sensor (VGS) not available)
- P0718 0718 Faulty structural unit Y3 / 8n1 (turbine speed sensor (VGS)
- P0720 0720 Mechanical failure of the structural unit Transmission
- P0721 0721 The signal of the output speed of the gearbox in comparison with the signal of the speed of the wheel is unreliable)
- P0722 0722 Signal from structural unit Y3 / 8n3 (output speed sensor (VGS) is not available)
- P0723 0723 Faulty structural unit Y3 / 8n3 (output speed sensor (VGS)
- P2716 2716 Internal electrical check of structural unit Y3 / 8y4 (clutch control solenoid valve K3 (VGS) failed)
- P2725 2725 Internal electrical check of component Y3 / 8y6 (brake control solenoid valve B2 (VGS) failed)
- P2734 2734 Internal electrical check of component Y3 / 8y3 (clutch control solenoid valve K2 (VGS) failed)
- P2759 2759 Internal electrical check of structural assembly Y3 / 8y8 (torque converter lock-up clutch control valve (VGS) failed)
- P2766-2766 An increased speed has occurred on the structural unit Y3 / 8n2 (internal speed sensor (VGS)
- P2767 2767 Signal from structural unit Y3 / 8n2 (internal speed sensor (VGS) not available)
- P2768 2768 Faulty structural unit Y3 / 8n2 (internal speed sensor (VGS)
- P2783 2783 The friction power of the torque converter lockup clutch is too high)
- P2805 2805 Shift range sensor signals are not reliable compared to signals of intelligent servo module)
- P2810 2810 Internal electrical check of component Y3 / 8y1 (working pressure control solenoid valve (VGS) failed)
![Automatic transmission control board 722.9 04-up — A0009018008 [VGS3-NAG2] GEN3](https://maktrans.net/image/cache/catalog/easyphoto/20420/elektronnaya-plata-upravleniya-akpp-722-9-04-up-a0009018008-vgs3-nag2-gen3-data-proizvodstva-31-05-2023-6-228x228.jpg)
