Input shaft and front planetary gear AWF8G30 [G263] [assembly with ring gear]

Input shaft and front planetary gear AWF8G30 [G263] | [assembly with ring gear]

• Overall height - 217 mm;
• The number of splines on the shaft - 20 pcs;
• The outer diameter of the splined part is 21.30 mm;
• The outer diameter of the working part of the shaft [located under the splined part of the shaft] - 22.10 mm;
• The number of Teflon rings on the front of the shaft - 3 pcs;

Shaft rear part:

• The number of splines on the inside of the shaft - 21 pcs;
• The outer diameter of the splined part - 27.10 mm;
• The outer diameter of the working part of the shaft [located closer to the base of the planetary gear] - 32.65 mm;

Front planetary gear:

• Number of external satellites [ring gear satellites] - 5 pcs | number of teeth - 17 pcs;
• Number of internal satellites [sun gear satellites] - 5 pcs | number of teeth - 15 pieces;
• K4 hub outer diameter - 109.10 mm;

sun gear:

• Number of teeth -38 pcs;
• Outer diameter - 62.45 mm;
• Gear width - 17 mm;
• The number of splines on the internal side - 37 pcs;​

Ring gear:

• The total height of the part - 52 mm;
• Number of teeth - 78 mm;
• K3 hub outer diameter - 147.40 mm;
• Outer diameter of hub K1 - 137.80 mm;