Pulley kit JATCO JF016E Nissan RE0F10D RE0F10F Mitsubishi F1CJC W1CJC disassembled driven pulley gear 25 teeth [OD 61.90 mm, 2 notches], without belt

• Driven Pulley [Disassembled] - Two Pulley Runners, Piston, Piston Cover, Piston Cover Retaining Ring, Radial Roller Bearing [with Cage and Backing Washer], Ball Bearing [Rear Cover Installation Side], Triangle Mounting Plate ], helical gear, nut, set of 3 rollers.
• Drive Pulley [Disassembled] - Two Pulley Runners, Piston [No Teflon Ring], Speed Sensor Gear, Back Plate [Triangle], Two Ball Bearings, Nut.

The pulleys are disassembled and checked, the condition of the working surfaces is checked for critical wear and the condition of the guide grooves of the distance rollers and the condition of the distance rollers themselves. The roller acts as a plain bearing. Teflon rings are not included in the kit; this is a consumable that must be changed during a major overhaul of the transmission. A new set of teflon rings can be purchased here.

The kit does not include a push, steel belt. The JF016E transmission has been installed on many vehicle manufacturers' vehicles in combination with different engine models that have their own individual power characteristics. In each case, the transmission has an individual combination of gear ratios, and a different marking of the pushing, steel transmission belt. You can buy belts by clicking on the links below:

Belt 901074

 Belt 901089