Rear planet AWTF-60SN 09G 09K 4/4 pinions with sun gears (hub K2 for 60 teeth friction plate / hub B2 56 teeth) 2 GEN

Rear planet  AWTF-60SN 09G 09K 4/4 pinions with sun gears (hub K2 for 60 teeth friction plate / hub B2 56 teeth) 2 GEN with removable sun gear FRONT SUN GEAR

Planetary total height (excluding the height of the sun gear)  69 mm.

• Hub K2 for friction plate - 60 teeth
• Hub B2 for friction plate - 56 teeth

Planetary pinions:

4 pinions (dual) of sun gear # 1 FRONT SUN GEAR

• The number of teeth 21 pcs.
• The height of thepinion gear (dual) is 50 mm.
• The diameter of the pinion (on the teeth)  31.45 mm.

4 sun gear pinions # 2 REAR SUN GEAR

• The number of teeth 20 pcs.
• The height of the pinion  gear 24 mm.
• The diameter of the pinion gear (on the teeth) 29.85 mm.

Planet sun gears

Sun gear # 1 REAR SUN GEAR:

Total height - 83 mm.
The number of splines 28 pcs.
The diameter of the spline part 29.80 mm.
The diameter (inner) of the inner bushings 22.10 mm.
The number of gear teeth 30 pcs.
The outer diameter of the gear (on the teeth)  44.30 mm.
The height of the teeth part is 26.70 mm.
Sun gear # 2 FRONT SUN GEAR (adjacent to single satellites, REMOVABLE)

• The number of teeth 42 pcs.
• The number of splines 20 pcs.
• The diameter of the spline part  41.80 mm.
• The diameter (inner) of the inner sleeve 29.95 mm.

The outer diameter of overrunning clutch hub LOW / REVERSE SPRAG (overrunning clutch mounting bed on a planetary ) is 139.40 mm.