Input shaft Drum E Clutch ZF 6HP19A (shaft diameter 25.90 mm, 4 friction plates)

Input shaft Drum E Clutch ZF 6HP19A (shaft diameter 25.90 mm, 4 friction plates)

•     Total height - 298 mm.
•     The diameter of the working part of the shaft over the spline part is 17.95 mm.
•     The diameter of the working part of the shaft at the base of the drum is 25.90 mm.
•     The height of the shaft (from the base of the drum) is 243 mm.
•     Drum height (taking into account ring gear) - 89.5 mm.
•     The number of splines on the shaft is 27 pcs.
•     The diameter of the splined part is 22 mm.

Ring gear:

•     The number of teeth is 71 pcs.
•     The outer diameter of the ring gear is 130 mm.
•     The inner diameter of the ring gear is 112.60 mm.
•     The height of the ring gear (gear part) is 24 mm.

The inter nal side of the drum:

•     The depth of the drum (from the top to the seat of the retaining ring) is 0.50 mm.
•     The depth of the drum from the seat of the retaining ring to the piston (installation site of steel and friction plates) is 24 mm.

Steel and friction plate kit E CLUTCH pack:

•     The total thickness of the pack is 19.80 mm.

Thrust plate (clamping):

•     Thickness - 3.35 mm.
•     The inner diameter is 97.05 mm.
•     The number of teeth is 24 pcs.
•     The number of plates in the set is 1 pcs.

Friction plate:

•     Thickness - 1.60 mm.
•     Outside diameter - 123.85 mm.
•     The number of teeths is 30 pcs.
•     The number of discs in the set is 4 pcs.

Steel plate:

•     Thickness - 2 mm.
•     The inner diameter is 97 mm.
•     The number of teeth is 24 pcs.
•      Kit plate number 4 pcs.

Pressure plate / spring (steel):

•     Thickness - 0.75 mm.
•     The inner diameter is 101 mm.
•     The number of teeth is 24 pcs.
•     Kit plate number 1 pcs.