Oil filter DSG-7 0CK 0CL 0CJ AUDI 15-up 0CK-325-421-A 0CK325421A 2-1084-000 0GC325183 [HCT]

Catalogue part number: VAG: 0CK325421A;VAG: 0CK-325-421A;LINESOON: 259710; AUTOLINE: A-OFL-0CK; HCT: HCT1882;

The filter was installed on the transmission: 0CK DSG, 0CL DSG, 0CJ DSG.

0CK (S-Tronic, DL382-7F)

Removal and installation requires special tools and equipment.
When working with the hydraulic control part, keep clean,
​Protect the oil passages from debris, the ingress of small particles can lead to malfunctions of the mechatronics.

• 1 - valve body (removal and installation)
• 2 - O-ring (replace)
• 3 - low pressure switch (replace)
• 4 - sealing ring (replace)
• 5 - filter cover (replace)
• 6 - M6 x 20 bolts (recommended to replace)
• 7 - O-ring (replace)
• 8 - suction filter (replace)
• 9 - M5 x 18 bolts (recommended to replace)
• 10 - M6 x 20 bolts (recommended to replace)
• 11 - filter cover (always replace)
• 12 - sealing ring (always replace)
• 13 - high pressure filter (always replace)
• 14 - sealing ring (always to be replaced)

Scheme and sequence of tightening the filter cover

High pressure filter cap - PAY ATTENTION TO ARROWS

Shoulder Bolt Tightening Specification/Optional Rotate
1. -1 to 3 Nm (set completely by hand)
2. -1 to 3 (8 Nm)
3. -1 to 3 (optionally rotate 90°)

Low Pressure Filter Cap - Step B

Bolt Torque Specification/Optional

To turn

1. -1 to 4 (set completely manually)

2. -1 to 4 (8 Nm)

3. -1 to 4 (optionally rotate 60°)