Input shaft and drum E Clutch ZF 6HP19X 6HP21X (4 friction plates)

Input shaft and drum E Clutch ZF 6HP19X 6HP21X (4 friction plates)

•     Total height - 298 mm.
•     The height of the shaft (from the base of the drum) is 236 mm.
•     Drum height (taking into account ring gear) - 89.70 mm.
•     The number of splines on the shaft is 27 pcs.
•     The diameter of the splined part is 22 mm.

Ring gear:

•     The number of teeths is 71 pcs.
•     The inner diameter of the ring gear is 112.70 mm.
•     The height of the ring gear (gear part) is 20 mm.

Drum internal side:

•     The depth of the drum (from the top to the seat of the retaining ring) is 0.50 mm.
•     The depth of the drum from the seat of the retaining ring to the piston (installation site of steel and friction plates) is 24 mm.

Steel and friction plate kit E CLUTCH clutch pack:
 

•     The total thickness of the pack is 18.50 mm.

Thrust plate (pressure):

•     Thickness - 3.50 mm.
•     The inner diameter is 97.05 mm.
•     The number of teeths is 24 pcs.
•     Kit plate number 1 pcs.

Friction plate:

•     Thickness - 1.25 mm.
•     Outside diameter - 123.85 mm.
•     The number of teeths is 30 pcs.
•     Kit plate number 1 pcs. 4 pcs.

Steel plate:

•     Thickness - 2.02 mm.
•     The inner diameter is 97 mm.
•     The number of teeths is 24 pcs.
•     Kit plate number 1 pcs.

Thrust / spring plate (steel):

•     Thickness - 0.75 mm.
•     The inner diameter is 101 mm.
•     The number of teeth is 24 pcs.
•     Kit plate number 1 pcs.