Planetary gearset F4A42 / Output Planet (4 satellites, 17 teeth per satellite) / Overdrive Planet (3 satellitess, 18 teeth per satellite)

Output planet:

• Total height - 114 mm;
• The number of splines on the neck is 39 pcs.;
• The outer diameter of the spline part is 40.85 mm;
• The outer diameter of the satellite body is 99.90 mm;
• Number of satellites - 4 pcs.;
• The number of teeth on the satellite is 17 pcs.;
• The number of teeth on the ring gear of the rear planetary gear is 62 pcs.;

Output planet sun gear:

• Total height - 89.90 mm;
• Inner diameter of the sleeve - 18.55 mm;
• The outer diameter of the gear shaft is 29.50 mm;
• Number of splines - 25 pcs.;
• The outer diameter of the spline part is 26.75 mm;
• The number of teeth on the gear is 38 pcs.;
• Gear outer diameter - 55.40 mm;
• Gear width - 18.05 mm;

Output planet ring gear:

• Total height - 87 mm;
• Outer diameter - 115.35 mm;
• Outer diameter along the outer teeth - 126.80 mm;
• The number of teeth on the ring gear is 70 pcs.;

Overrunning clutch hub:

• Outer diameter - 92.20 mm;
• Width - 19.50 mm;
• Number of teeth on the inside - 46 pcs.;

Overdrive planet:

• Total height - 50 mm;
• The outer diameter of the ring gear is 107.10 mm;
• Number of satellites - 3 pcs.;
• The number of teeth on the satellite is 18 pcs.; (2 notch on teeth)
• The number of splines on the inside is 23 pcs.;
• The outer diameter of the working part of the neck is 30.05 mm;

Overdrive sun gear:

• Total height (hub) - 58.60 mm;
• Outer diameter (hub) - 126.70 mm;
• Inner diameter of the sleeve - 25.15 mm;
• Number of teeth on the gear - 25 pcs.;
• ​The outer diameter of the gear is 40.10 mm;