€0.00
Checkout Valve block repair is a procedure to restore the functionality of the hydraulic unit, which is a key part of the automatic transmission. The valve body controls gear shifting and other transmission functions by monitoring the oil pressure within the transmission.
Here is the general valve body repair process:
At the beginning of valve body repair, a thorough diagnosis is carried out to identify the cause of the malfunction. This may include analyzing error codes, measuring oil pressure, and checking electrical components of the valve body.
![]() |
![]() |
The valve body is disassembled to gain access to its internal components. This includes removing valves, solenoids, springs and other parts.
![]() ![]() |
![]() |
Every part of the valve body is cleaned of oil and contaminants. A close inspection is then carried out to look for wear, damage and other problems.
![]() ![]() |
![]() ![]() |
![]() ![]() |
Damaged or worn components such as O-rings, valves, solenoids, separator plates are replaced with new or remanufactured ones.
After replacing the components, the valve body channels are tested for leaks using a vacuum tester.
![]() ![]() |
![]() ![]() |
![]() ![]() |
After replacing and adjusting all components, the valve body is put back together.
![]() ![]() |
![]() ![]() |
The valve body undergoes rigorous testing on the bench or on the road to ensure that it operates without errors. If any problems are found, they are eliminated.
![]() ![]() |
![]() ![]() |















